| Type: | Water Filter |
|---|---|
| Usage: | Environmental Protection |
| Motive Force: | Pressure |
| Style: | Vertical |
| Performance: | Efficient Filtration |
| Certification: | CE, RoHS |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Brief introduction
Sand filter system include tanks with underdrain system, backwash valve, piping and automatic control system.
DMF filters are designed for the most challenging dirty water conditions with a high performance solution for water filtration down to 20 microns. These durable carbon steel filters utilize a 24"-54" vertical side shell depth for removal of organic and inorganic suspended solids for filtering large volumes of water with very little pressure drop and a long-term value.
Application
If you need sand filter for agricultural irrigation, please select model as below.(40 micron)
| Model | Vessel qualities | Flow(min.) (m3/h) |
Flow(max.) (m3/h) |
Filtration area (m2) |
Backwash flow(single vessel) (m3/h) |
Pressure (max.) (Bar) |
Water in/out | Backwash pipe |
| DMF-2016-1A | 1 | 8 | 13.5 | 0.2 | 13.5 | 8 | 2" | 2" |
| DMF-2416-1A | 1 | 13.5 | 22 | 0.28 | 22 | 8 | 2" | 2" |
| DMF-2016-2A | 2 | 16 | 27 | 0.4 | 13.5 | 8 | 2" | 2" |
| DMF-2816-1A | 1 | 18 | 30 | 0.38 | 30 | 8 | 3" | 3" |
| DMF-2416-2A | 2 | 27 | 44 | 0.56 | 22 | 8 | 3" | 2" |
| DMF-3616-1A | 1 | 28 | 50 | 0.64 | 50 | 8 | 3" | 3" |
| DMF-2816-2A | 2 | 36 | 60 | 0.77 | 30 | 8 | 4" | 3" |
| DMF-2416-3A | 3 | 40.5 | 66 | 0.85 | 22 | 8 | 3" | 3" |
| DMF-4816-1A | 1 | 50 | 85 | 1.13 | 85 | 8 | 4" | 4" |
| DMF-2816-3A | 3 | 54 | 90 | 1.15 | 30 | 8 | 4" | 3" |
| DMF-3616-2A | 2 | 56 | 100 | 1.28 | 50 | 8 | 4" | 3" |
| DMF-3616-3A | 3 | 84 | 150 | 1.92 | 50 | 8 | 6" | 3" |
| DMF-4816-2A | 2 | 100 | 170 | 2.26 | 85 | 8 | 6" | 4" |
| DMF-4816-3A | 3 | 150 | 255 | 3.39 | 85 | 8 | 8" | 4" |
| DMF-4816-4A | 4 | 200 | 340 | 4.52 | 85 | 8 | 8" | 4" |
| DMF-4816-5A | 5 | 250 | 425 | 5.65 | 85 | 8 | 10" | 4" |
| DMF-4816-6A | 6 | 300 | 510 | 6.78 | 85 | 8 | 10" | 4" |
Working principle
The Filtering Process
Filtering with media filters, also known as depth filtration, is done by filtering water through a thick layer of graded particles, called the filter bed. These particles can be sand, gravel or other granular materials. The filtration degree depends on the effective size of the bedding and the water velocity through the filter.
Raw water enters from the filter inlet (1) and percolates through the filter bed (2). Suspended materials come into contact and attach to the media particles. Clean water flows through the filtration nozzles (3) and out of the filter via the outlet valve (4).
The gradual dirt buildup in the filter bed causes an increase in the pressure differential across the filter and when it reaches its maximum design value, a cleaning process should be performed. In automatic media filter installations a pressure differential switch senses the pressure differential and when it reaches a preset value, the self cleaning process begins.
The Cleaning Process
Cleaning is done by backwashing; pressurized water flows in reverse direction - from the nozzles upwards, causing suspension of the filter bed, thus releasing the suspended matter from the bedding. The dirt particles are then washed out of the filter through the back-flush valve. In automatic media filters installations the cleaning process is done by the system's controller. When the pressure differential switch senses that the differential pressure across the system reached a pre-set value, a signal is sent to the flushing controller and the self cleaning process begins.
Company introduction
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}