Automatic Backwash Water Filter 1000/2000/3000 Micron

• Customization: Available
• Type: Irrigation
• Usage: Environmental Protection
• Motive Force: Pressure
• Style: Horizontal
• Performance: Efficient Filtration
• Certification: CE, ISO
• Pressure: 2-10bar
• Flow Rate: 12-10000m3/H
• Material: Carbon Steel/SS304/SS316
• Precision: 800-6000microns
• Mesh: SS316
• Water in/out: 2-10 Inch
• Working Temperature: ≤65
• Pressure Loss: 0.2-0.5bar
• Cleaning Time: 20-200s
• Cleaning Way: Differential Pressure/Time/PLC
• Transport Package: Wooden Case
• Specification: 1~10CBM
• Trademark: CDFS
• Origin: Changsha, Hunan, China
• HS Code: 8421219990
• Production Capacity: 200 Sets/Month

Product Description

DLDZ-I horizontal type datas

 

Model	Flow	L1	H1	H2	L	DN1	DN2	Diverter valve	Electric drain valve motor
DLDZ-I-150	160	485	480	645	675	100	50	60W	15W
DLDZ-I-200	320	490	540	795	735	200
DLDZ-I-250	490	586	590	825	875	250
DLDZ-I-300	710	698	650	850	1050	300
DLDZ-I-350	970	785	730	910	1200	350
DLDZ-I-400	1260	940	780	930	1400	400	80	90W	25W
DLDZ-I-450	1600	1035	830	985	1550	450
DLDZ-I-500	1970	1140	960	1025	1700	500	100
DLDZ-I-600	1970	1315	1050	1070	2000	600		180W
DLDZ-I-700	3880	1580	1150	1140	2280	700	150		60W
DLDZ-I-800	5080	1720	1300	1220	2500	800
DLDZ-I-900	6410	2000	1450	1300	2800	900
DLDZ-I-1000	9910	2270	1610	1400	3120	1000

 

Principle overview
DLDZ series electric automatic backwash filter consists of filter body, differential pressure switch, program controller, drain valve and cleaning actuator.
When there is a dirty substance in the filter body, the differential pressure switch sends the detected differential pressure signal to the program controller, and the program controller processes the signal, instructs the cleaning actuator to perform the cleaning work, and simultaneously instructs the drain valve to open for sewage discharge.


1.Filtering state
The plane of the valve plate is parallel to the axis of the cylinder and the drain valve is closed. At this time, the water flow directly enters the inside of the filter cylinder from the inlet, through the filter screen, and is discharged from the outlet.

2.Back washing state
The plane of the valve plate is perpendicular to the axis of the cylinder, and the drain valve is opened. At this time, the water flows from the inlet into the front end of the filter cylinder, and the water flow is blocked by the valve plate, and can only enter the outside of the filter cartridge from the front end mesh, and most of it flows out from the outlet.
And because drain outlet is opened, the pressure of the water in the rear part of the filter cartridge is reduced, so a part of the water is backflushed into the mesh cylinder from the mesh of the rear section of the filter,  then the particles on the screen flow out from drain out.

Filter material
Shell: carbon steel, 304 stainless steel, 316L stainless steel
Screen: 304 stainless steel, 316L stainless steel
Drain valve, cast iron,copper,stainless steel,PVC,nylon
Controller: PVC, aluminum
Seal ring: EPDM rubber
Suction: stainless steel, PVC
 

Technical Parameters

The maximum filtration flow rate of a single unit can reach 4000m3/h

Filtering accuracy from 6000 microns to 800 microns

Minimum working pressure ≥0.2Mpa

Maximum working pressure ≤1.6MPa (special customizable)

Working temperature ≤65°C

Power supply: 220V/50Hz

Control voltage: AC24V

Cleaning time: adjustable from 10 to 200 seconds

Control method: differential pressure, time, manual

Packing&Shipping



Company Infomation 



Contact us